THE ANALYSIS OF RECIPROCATING COMPRESSOR PK 60-150 FAILURE USING FAILURE MODE AND EFFECT ANALYSIS METHOD
DOI:
https://doi.org/10.21831/jps.v22i2.15444Keywords:
reciprocating compressor, FMEA method, failure mode, RPNAbstract
The reciprocating compressor PK 60-150 is the most common type of compressor used in industries. The effect of each failure mode on the reciprocating compressor
was analyzed using FMEA, so that the necessary action can be determined. Both increasing the operating time and preventing the damage of compressor are
major concerns. This study was aimed to determine the problems that cause risk of safety, failure of compressor function, and shortening of compressor life time,
so that maintenance and repair cost can be reduced. The result shows that the breaking of high wires and fuses, over heat and wear of the piston are the most
affecting factors of compressor failure with RPN value of 64
References
Arifi n, M. (2010). Pembuatan alat praktikum perawatan kompresor torak
ganda (Proyek Akhir). Fakultas Teknik, Universitas Sebelas Maret,
Surakarta.
Arora, R. C. (2010). Refrigeration and air conditioning. New Delhi: PHI Learning
Pvt. Ltd.
Basjir, M., Supriyanto, H., & Suef, M. (2011, Februari). Pengembangan model penentuan prioritas perbaikan terhadap mode kegagalan komponen dengan metodologi FMEA, fuzzy dan topsis yang terintegrasi. Makalah dipresentasikan pada Seminar Nasional Manajemen Teknologi XIII, ITS Surabaya.
Ben-Daya, M. (2009). Failure mode and effect analysis. Dalam M. Ben-Daya, D. AitKadi, S.O Duffuaa, J. Knezevic, & A. Raouf (Eds.), Handbook of maintenance
management and engineering (pp. 75- 90). London: Springer.
Elhaj, M., Gu, F.,Ball, A., Albarbar, A., AlQattan,M., & Naid, A. (2008). Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring. Mechanical Systems and Signal Processing, 22(2), 374-389.
Iswanto, A., Rambe, A. J. M., & Ginting, E. (2013). Aplikasi metode Taguchi
Analysis dan failure mode and effect analysis (FMEA) untuk perbaikan
kualitas produk di PT. XYZ. Jurnal Teknik Industri USU, 2(2).
Lubis, Y. A., & Wonoyudo, B. D. (2014). Karakteristik getaran dan efi siensi
kompresor torak akibat perubahan profi l pada valve seat sisi discharge.
Jurnal Teknik ITS, 3(1), B114-B119.
Mobley, R. K. (1999). Root cause failure analysis. Oxford: Butterworth-Heinemann.
Stamatis, D. H. (2003). Failure mode and effect analysis: FMEA from theory to
execution. Milwaukee: ASQ Quality Press.
Syawal, S., & Yusuf, M. (2011). Perencanaan kompresor piston pada tekanan kerja max 2 N/mm2. Jurnal Mesin Teknologi, 5(1).
Downloads
Published
How to Cite
Issue
Section
License
Who Can Submit?
Any individual may submit an original manuscript for consideration for publication in Jurnal Penelitian Saintek as long as they hold the copyright to the work or are authorized by the copyright owner(s) to submit it. Authors retain initial ownership of the copyrights to their works prior to publication, except in cases where, as a condition of employment, they have agreed to transfer copyright to their employer.
User Rights
Jurnal Penelitian Saintek is an Open Access journal. Users are granted the right to read, download, copy, distribute, print, search, or link to the full texts of articles, provided they comply with the conditions of the Creative Commons Attribution-ShareAlike License 4.0 (CC BY-SA 4.0).
https://creativecommons.org/licenses/by-sa/4.0/
Author Rights
Authors retains copyrights.
Jurnal Penelitian Saintek by http://journal.uny.ac.id/index.php/saintek is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
