Vocational Curriculum Implementation of the Three Years Program of Electronics Engineering

Lipur Sugiyanta; Moch Sukardjo; M. Khairudin; Irdayanti Mat Nashir

doi:10.21831/jptk.v25i1.18347

Authors

Lipur Sugiyanta
lipurs@unj.ac.id
Department of Electronics Engineering Education, Universitas Negeri Jakarta, Indonesia
Moch Sukardjo Department of Electronics Engineering Education, Universitas Negeri Jakarta, Indonesia
M. Khairudin Department of Electrical Engineering Education, Universitas Negeri Yogyakarta, Indonesia
Irdayanti Mat Nashir Fakulti Teknikal dan Vokasional Universiti Pendidikan Sultan Idris, Perak, Malaysia

Vol. 25 No. 1 (2019): (May)

Articles

Accepted May 31, 2018

Published April 10, 2019

Downloads

PDF

Abstract
How to Cite
Author Biographies
Metrics
References
License

This study analysed the implementation of the Indonesian Qualification Framework based vocational curriculum in the three years program of an electronics engineering, Faculty of Engineering, Universitas Negeri Jakarta. The analysis was focused on lecturers and students' views. This evaluation used the model of Context, Input, Process, Product by involving 49 students in the 3^rd semester, 6 lecturers, and administration staff. The findings showed that the implemented learning activities using the new curriculum paradigm are reliable. The context analysis indicated the correlation between lecturers' competence and qualification and the goals of the study program. The input analysis showed that the lecturer's assignment was appropriate and correspond with lecturers' subject and education background. The process analysis revealed that the learning process was in accordance with the lectures' planning. In addition, the practicum activities were reportedly consistent with the academic calendar. The product analysis, in the form of courses distribution each semester, suggested that the needs for improvement to fit the new curriculum paradigm design.

Sugiyanta, L., Sukardjo, M., Khairudin, M., & Mat Nashir, I. (2019). Vocational Curriculum Implementation of the Three Years Program of Electronics Engineering. Jurnal Pendidikan Teknologi Dan Kejuruan, 25(1), 85–96. https://doi.org/10.21831/jptk.v25i1.18347

Download Citation

Secretariat Cabinet of the Republic of Indonesia, Peraturan Pemerintah Nomor 8 tahun 2012 tentang Kerangka Kualifikasi Nasional Indonesia. Indonesia, 2012.

E. P. Widoyoko, Penilaian Hasil Pembelajaran di Sekolah. Yogyakarta: Pustaka Pelajar, 1994.

T. and H. E. Ministry of Research, Kepmenristekdikti nomor 257/M/KPT/2017 tgl 5 September 2017 tentang Nama Program Studi pada Perguruan Tinggi. Indonesia, 2017.

Ministry of Education and Culture, "SK no. 5041/D/T/K-N/2010 tanggal 21 Mei 1999 tentang Pembukaan Program Studi Teknik Elektronika," 2010.

Z. Arifin, M. Martubi, K. Haryana, M. Solikin, and I. Siswanto, "Penyelarasan Kurikulum Jurusan Pendidikan Teknik Otomotif FT UNYBerbasis Kerangka Kualifikasi Nasional Indonesia," J. Pendidik. Teknol. dan Kejuru., vol. 22, no. 1, pp. 119–126, 2014.

E. Supriyadi, "Kajian Kurikulum Jurusan Pendidikan Teknik Elektro Fakultas Teknik Universitas Negeri Yogyakarta Mengacu pada Kerangka Kualifikasi Nasional Indonesia," J. Pendidik. Teknol. dan Kejuru., vol. 21, no. 2, pp. 156–166, 2012.

P. Handayani, T. Y. Putro, E. Rakhman, and S. J. -Ching, "Learning Outcomes Mapping of the Three Year-Electronic Engineering Diploma in Level-5 Professional Expertise of the National Qualification Framework," J. Pendidik. Teknol. dan Kejuru., vol. 24, no. 1, pp. 102–115, Apr. 2018.

J. C. Galvin, "What Can Trainers Learn from Educators about Evaluating Management Training?," Train. Dev. J., vol. 47, no. 2, pp. 228–244, 1983.

H. Bowers, "Curriculum Design in Vocational Education," in Australian Association for Research in Education – 2006 Conference, 2006.

M. L. Donna., "Implementing a Holistic Approach in Vocational Education and Training," Aust. J. Adult Learn., vol. 47, no. 2, pp. 228–244, 2007.

J. Wang, "The Comparison and Inspiration of Outcome-based Curriculum Design in Canada and Higher Vocational Education in China," in 2nd International Conference on Management Science and Industrial Engineering (MSIE 2013), 2013, pp. 709–712.

M. Holland, M. Coldwell, S. Trickey, and B. Morgan, "The Development of the Secondary Vocational Curriculum in a Northern Local Authority in England," in European Conference of Education Research (ECER VETNET Conference 2007), 2007.

D. Laird and J. Stevenson, "A Curriculum Development Framework for Vocational Education," Aust. New Zeal. Joumal Vocat. Educ. Res., pp. 71–92, 1993.

L. Geleto, "Technical Vocational Education Training Institute Curriculum Development in Ethiopia," J. Educ. Vocat. Res., vol. 8, no. 3, pp. 16–28, 2017.

N. J. Walters, "Curriculum: Framework for the Future," J. Vocat. Tech. Educ., vol. 5, no. 1, pp. 28–39, 1988.

J. W. Rojewski, "A Conceptual Framework for Technical and Vocational Education and Training," in International Handbook of Education for the Changing World of Work, R. Maclean and D. Wilson, Eds. Berlin: Springer, 2009, pp. 19–39.

A. D. Minghat and R. M. Yasin, "Sustainable Framework for Technical and Vocational Education in Malaysia," Procedia Soc. Behav. Sci. 9, vol. 9, pp. 111233–1237, 2010.

Y. Zhang and L. Li, "Construction of Curriculum According to a Competency-Based Curriculum Framework for The Specialty of Health Information Management in Higher Vocational Colleges," in IEEE International Symposium on IT in Medicine and Education 2011, 2011.

P. Boahin, "Competency-Based Curriculum: A Framework for Bridging the Gap in Teaching, Assessment and the World of Work," Int. J. Vocat. Tech. Educ. Res., vol. 4, no. 2, pp. 1–15, 2018.

Vocational Curriculum Implementation of the Three Years Program of Electronics Engineering

Authors

Downloads

Lipur Sugiyanta, Department of Electronics Engineering Education, Universitas Negeri Jakarta

Moch Sukardjo, Department of Electronics Engineering Education, Universitas Negeri Jakarta

Login

Information

Current Issue

SidebarMenu

ArticleTemplate

Article Template

indexed-bar

TOOLS

Keywords

Editorial Pick

The application of SCADA systems on wrapping machines using plc and wonderware intouch in the automotive manufacturing industry

Social media impact on cosmetology students in enhancing makeup techniques ability and their character building

Development of hair dyeing teaching materials using peek a boo technique based on e-books

Perceptions of industry and education practitioners regarding 21st-century multiple intelligence qualifications for vocational education

Utilizing botley robotics to facilitate the development of computational thinking skills in children with visual impairment

Enhancing economics education through phenomenography, variation theory, and multiple representations

Supporting aspects of entrepreneurial interest: an empirical study reviewing creative, strategic, and digital competencies (EI-CSDC)

How digital competency for Indonesian TVET educators explored in the last decade: a systematic literature review based on the Australian qualification framework

Acceptance analysis of using google classroom with the UTAUT method in online learning

Achievements of the national education standards and education quality assurance implementations in vocational high schools in D.I. Yogyakarta

widget