Vol. 5 No. 1 (2024): (March)

Articles

• Stereolithography 3D printing for the investigation of acoustic focusing

  Burhan Febrinawarta (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia)
  I Made Miasa (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia)
  Adhika Widyaparaga (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia)
  Sucipto Sucipto (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia)
  Witnadi Dardjat Premiaji (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Indonesia)

  01-10

  Abstract View : 145

  PDF downloads: 138

  DOI : 10.21831/jeatech.v5i1.71672

  • PDF

• Design of website-based Preventive Maintenance Checklist Smart System (PMCSS) to support the operation of ARFF vehicles at I Gusti Ngurah Rai Airport

  I Gusti Ngurah Bagus Arya Dwipa (Aviation Fire and Rescue Study Program, Palembang Aviation Polytechnic, Indonesia)
  Anton Abdullah (Aviation Fire and Rescue Study Program, Palembang Aviation Polytechnic, Indonesia)
  M. Indra Martadinata (Airport Engineering Technology Study Program, Palembang Aviation Polytechnic, Indonesia)
  Yeti Komalasari (Aviation Fire and Rescue Study Program, Palembang Aviation Polytechnic, Indonesia)
  Direstu Amalia (Airport Engineering Technology Study Program, Palembang Aviation Polytechnic, Indonesia)

  11-23

  Abstract View : 167

  PDF downloads: 179

  DOI : 10.21831/jeatech.v5i1.67708

  • PDF

• Experimental study: coolant viscosity's impact on Inconel 600's surface roughness measured using a refractometer

  Nur Fitria Pujo Leksonowati (Department of Mechanical Engineering, Politeknik Negeri Batam, Indonesia)
  Nurman Pamungkas (Department of Mechanical Engineering, Politeknik Negeri Batam, Indonesia)
  Meilani Mandalena Manurung (Department of Mechanical Engineering, Politeknik Negeri Batam, Indonesia)
  Ninda Hardina Batubara (Department of Mechanical Engineering, Politeknik Negeri Batam, Indonesia)
  Hanifah Widiastuti (Department of Mechanical Engineering, Politeknik Negeri Batam, Indonesia)

  24-36

  Abstract View : 160

  PDF downloads: 302

  DOI : 10.21831/jeatech.v5i1.71254

  • PDF

• Feasibility Assessment of Construction 4.0 Technology Investment: Drones, Building Information Modeling (BIM) and Virtual Reality (VR)

  Herdiana Safira (Department of Civil Engineering, Indonesia Computer University, Indonesia)
  Yongki Alexander Tanne (Department of Civil Engineering, Indonesia Computer University, Indonesia)
  Muhamad Samsul Maarif (Department of Civil Engineering, Indonesia Computer University, Indonesia)

  37-51

  Abstract View : 168

  PDF downloads: 206

  DOI : 10.21831/jeatech.v5i1.71123

  • PDF

• Soil liquefaction measurement and adjustment system on shaking table for seismic simulation

  Mahmud Abdul Karim (Department of Electrical Engineering, Jakarta State Polytechnic, Indonesia)
  Dea Aulia Sakinah (Department of Electrical Engineering, Jakarta State Polytechnic, Indonesia)
  Dimas Nugroho Nuradryanto (Department of Electrical Engineering, Jakarta State Polytechnic, Indonesia)
  Sulis Setiowati (Department of Electrical Engineering, Jakarta State Polytechnic, Indonesia)
  Rika Novita Wardhani (Department of Electrical Engineering, Jakarta State Polytechnic, Indonesia)
  A'isyah Salimah (Department of Civil Engineering, Jakarta State Polytechnic, Indonesia)
  Yelvi Yelvi (Department of Civil Engineering, Jakarta State Polytechnic, Indonesia)

  52-64

  Abstract View : 137

  PDF downloads: 121

  DOI : 10.21831/jeatech.v5i1.65479

  • PDF