PEMBUATAN MESIN PROFIL (ROUTER) STATIS UNTUK INDUSTRI KECIL MEBEL KA YU

Authors

  • Darmono Darmono Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.21831/ino.v5i1.5193

Abstract

The  voucher  program entitled  "Manufacturing  Static  Profiling  Machine(Router) for Small Wood Furniture Industries"  aims to increase  productivity  of the Indah  Jaya wood  furniture  industry especially  in profile  production  of the produced furniture.  It also wants to know the capacity and productivity  of such static router machine.The  steps  of  this  manufacturing  static  router  machine  are  planning,machine manufacturing,  and training for industry partner workers.  The planning step  includes  : (l)   designing  machine  plan  draft,  (2)  calculating  the  needed materials,  and  (3) calculating  the  implementation  cost.  The  machine manufacturing  step  includes  :  (1)  material  cutting  to  fit  the  work  draft,  (2) welding,  (3) assembling,  (4) electric installation. (5) machine performance  test, and (6) painting. The training for industry partner workers consists of:  (1) theory and speech delivery, (2) demonstration of machine using, and (3) mahcine using practice by the industry partner workers.The result of the voucer program is realization of a static router machine and skill acievement  by the industry partner workers in the machine operation. The static  router machine was made of right-angled  iron frame sizing 50x50x5 mm combined with steel plate of 3 mm thick. The machine is in 120x80x60 cm size moved by an electric motor power, SEM, of 0,5 HP and rotation  speed of2800   RPM.   The   machine   performance    and   productivity    especially    formanufacturing straight and curved, profiles for 9 mm size of meranti, kamper, and teak wood, is twice in speed as that of protable machines. If it is compared to that of manual profile planner, for manufacturing profiles with the same form and size, the router machine has five times in speed.
Key words:   profile  machine,  small industry,  and wood furniture.

Downloads

How to Cite

[1]
Darmono, D. 2015. PEMBUATAN MESIN PROFIL (ROUTER) STATIS UNTUK INDUSTRI KECIL MEBEL KA YU. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 5, 1 (Aug. 2015). DOI:https://doi.org/10.21831/ino.v5i1.5193.

Issue

Vol 5, No 1 (2003)

Section

Articles

License

  1. Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
  2. Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
  3. Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript. 
  4. Authors reserve the following: 
    1. all proprietary rights other than copyright such as patent rights; 
    2. the right to use all or part of this article in future works of our own such as in books and lectures;
    3. use for presentation in a meeting or conference and distributing copies to attendees; 
    4. use for internal training by author's company;
    5. distribution to colleagues for their research use;
    6. use in a subsequent compilation of the author's works;
    7. inclusion in a thesis or dissertation;
    8. reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
    9. preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
    10. voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.