PENGEMBANGAN TUNGKU PELEBURAN ALUMINIUM UNTUK MENGEMBANGKAN KOMPETENSI PENGECORAN DI SMK PROGRAM STUDI KEAHLIAN TEKNIK MESIN

Authors

  • lppm uny

DOI:

https://doi.org/10.21831/ino.v18i1.13386

Abstract

The program is aimed at developing casting competence at SMK Muhammadiyah Prambanan Yogyakarta by developing gas fueled aluminium crucible furnace. Research and development method was used to develop aluminium crucible furnace. Training on crucible furnace operation and aluminium casting for SMK Muhammadiyah teachers was done using demonstration and lecture method. The program result is (í˜600x500)mm crucible furnace with capacity of 15 kg melted aluminium. The furnace need 2,7 kg of LPG and 55 minutes to melt 8,6 kg aluminium. SMK Muhammadiyah Prambanan teachers are able to operate the furnace, to make a sand mold and to do a daily and special maintenance

Downloads

Published

2017-09-11

How to Cite

[1]
uny, lppm 2017. PENGEMBANGAN TUNGKU PELEBURAN ALUMINIUM UNTUK MENGEMBANGKAN KOMPETENSI PENGECORAN DI SMK PROGRAM STUDI KEAHLIAN TEKNIK MESIN. INOTEKS: Jurnal Inovasi Ilmu Pengetahuan,Teknologi, dan Seni. 18, 1 (Sep. 2017). DOI:https://doi.org/10.21831/ino.v18i1.13386.

Issue

Vol 18, No 1 (2014)

Section

Articles

License

  1. Authors certify that the work reported here has not been published before and contains no materials the publication of which would violate any copyright or other personal or proprietary right of any person or entity.
  2. Authors transfer or license the copyright of publishing to Jurnal Civics: Media Kajian Kewarganegaraan to publish the article in any media format, to share, to disseminate, to index, and to maximize the impact of the article in any databases.
  3. Authors hereby agree to transfer a copyright for publishing to Jurnal Civics: Media Kajian Kewarganegaraanas a Publisher of the manuscript. 
  4. Authors reserve the following: 
    1. all proprietary rights other than copyright such as patent rights; 
    2. the right to use all or part of this article in future works of our own such as in books and lectures;
    3. use for presentation in a meeting or conference and distributing copies to attendees; 
    4. use for internal training by author's company;
    5. distribution to colleagues for their research use;
    6. use in a subsequent compilation of the author's works;
    7. inclusion in a thesis or dissertation;
    8. reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
    9. preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); and
    10. voluntary posting on open web sites operated by author or author's institution for scholarly purposes, but it should follow the open access license of Creative Common CC BY-NC-SA License.