Using Different Size of Montmorillonite Particles for Filtration-Adsorption of Nickel Metal in Electroplating Liquid Waste

Authors

  • Dyah Mustika Braniwati Universitas Negeri Yogyakarta
  • Erfan Priyambodo Universitas Negeri Yogyakarta

DOI:

https://doi.org/10.21831/ijoce.v4i1.45295

Abstract

This study aims to know the effect of montmorillonite particle, which were granule and gravel of montmorillonite,prepared from the sintering method and its effectiveness in filtration-adsorption process of the nickel-metal in electroplating liquid waste. The granule and gravel of montmorillonite wereprepared by compaction and sintering processes at a temperature of 900oC. The characterization of granule montmorillonite shows the notoriously random micropore material, which the pore surface area was 8.393 m2/g. While the gravel montmorillonite has a pore surface area of 4,381 m2/g. The test was carried out by flowing electroplating waste with the crossflow filtration method and batch adsorption. The most effective decrease in the concentration of nickel-metal occurred in the granules of montmorillonite with a mass ratio of material through filtration and adsorptionwas 2:3. The effectiveness of filtration-adsorption process for removing nickel metal from liquid waste of electropaling was 83.51%.

Downloads

Published

2021-11-21

How to Cite

[1]
Braniwati, D.M. and Priyambodo, E. 2021. Using Different Size of Montmorillonite Particles for Filtration-Adsorption of Nickel Metal in Electroplating Liquid Waste. Indonesian Journal of Chemistry and Environment. 4, 1 (Nov. 2021), 1–6. DOI:https://doi.org/10.21831/ijoce.v4i1.45295.

Issue

Vol. 4 No. 1 (2021): JUNE 2021

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.